[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

Package Summary

The velo2cam_calibration package

  • Maintainer status: maintained
  • Maintainer: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • Author: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • License: GPLv2
  • Source: git https://github.com/beltransen/velo2cam_calibration.git (branch: master)

Package Summary

The velo2cam_calibration package

  • Maintainer status: maintained
  • Maintainer: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • Author: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • License: GPLv2
  • Source: git https://github.com/beltransen/velo2cam_calibration.git (branch: master)

Package Summary

The velo2cam_calibration package

  • Maintainer status: maintained
  • Maintainer: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • Author: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • License: GPLv2
  • Source: git https://github.com/beltransen/velo2cam_calibration.git (branch: master)

Package Summary

The velo2cam_calibration package

  • Maintainer status: maintained
  • Maintainer: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • Author: Jorge Beltran <jbeltran AT ing.uc3m DOT es>, Carlos Guindel <cguindel AT ing.uc3m DOT es>
  • License: GPLv2
  • Source: git https://github.com/beltransen/velo2cam_calibration.git (branch: master)

Overview

The velo2cam_calibration software implements a state-of-the-art automatic calibration algorithm for pair of sensors composed of LiDAR and camera devices in any possible combination, as described in this paper:

Automatic Extrinsic Calibration Method for LiDAR and Camera Sensor Setups

Jorge Beltrán, Carlos Guindel, Arturo de la Escalera, Fernando García

IEEE Transactions on Intelligent Transportation Systems, 2022

[ Paper ] [ Preprint ]

real_results.png

Setup

This software is provided as a ROS package. To install:

  1. Clone the repository into your catkin_ws/src/ folder.

  2. Install run dependencies: sudo apt-get install ros-<distro>-opencv-apps

  3. Build your workspace as usual.

Usage

See the HOWTO guide for detailed instructions on how to use this software.

To test the algorithm in a virtual environment, you can launch any of the calibration scenarios included in our Gazebo validation suite.

Calibration target

The following picture shows a possible embodiment of the proposed calibration target used by this algorithm and its corresponding dimensional drawing.

calibration_target_real_scheme_journal.png

Note: Other size may be used for convenience. If so, please configure node parameters accordingly.

Citation

If you use this work in your research, please consider citing the following paper:

@article{beltran2022,  
  author={Beltrán, Jorge and Guindel, Carlos and de la Escalera, Arturo and García, Fernando},  
  journal={IEEE Transactions on Intelligent Transportation Systems},   
  title={Automatic Extrinsic Calibration Method for LiDAR and Camera Sensor Setups},   
  year={2022}, 
  doi={10.1109/TITS.2022.3155228}
}

A previous version of this tool is available here and was described on this paper.


2024-03-16 13:06