[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

cob_driver: cob_arm | cob_base | cob_base_drive_chain | cob_battery | cob_camera_sensors | cob_canopen_motor | cob_forcetorque | cob_generic_can | cob_head_axis | cob_hokuyo | cob_joint_state_aggregator | cob_joy | cob_light | cob_manipulator | cob_oodl_scanner | cob_powercube_chain | cob_pseudo_joint_state_publisher | cob_relayboard | cob_sdh | cob_sick_s300 | cob_sound | cob_torso | cob_touch | cob_trajectory_controller | cob_tray | cob_tray_sensors | cob_undercarriage_ctrl

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

cob_driver: cob_base_drive_chain | cob_base_velocity_smoother | cob_camera_sensors | cob_canopen_motor | cob_collision_velocity_filter | cob_footprint_observer | cob_generic_can | cob_head_axis | cob_hokuyo | cob_hwboard | cob_light | cob_phidgets | cob_relayboard | cob_sick_s300 | cob_sound | cob_touch | cob_trajectory_controller | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

cob_driver: cob_base_drive_chain | cob_base_velocity_smoother | cob_camera_sensors | cob_canopen_motor | cob_collision_velocity_filter | cob_footprint_observer | cob_generic_can | cob_head_axis | cob_hokuyo | cob_hwboard | cob_light | cob_phidgets | cob_relayboard | cob_sick_s300 | cob_sound | cob_touch | cob_trajectory_controller | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

cob_driver: cob_base_drive_chain | cob_base_velocity_smoother | cob_cam3d_throttle | cob_camera_sensors | cob_canopen_motor | cob_collision_velocity_filter | cob_footprint_observer | cob_generic_can | cob_head_axis | cob_hokuyo | cob_hwboard | cob_light | cob_phidgets | cob_relayboard | cob_sick_s300 | cob_sound | cob_touch | cob_trajectory_controller | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

cob_driver: cob_base_drive_chain | cob_camera_sensors | cob_canopen_motor | cob_generic_can | cob_head_axis | cob_hokuyo | cob_hwboard | cob_light | cob_phidgets | cob_relayboard | cob_sick_lms1xx | cob_sick_s300 | cob_sound | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

  • Maintainer status: developed
  • Maintainer: Matthias Gruhler <mig AT ipa.fhg DOT de>
  • Author: Christian Connette
  • License: LGPL
  • Source: git https://github.com/ipa320/cob_driver.git (branch: hydro_release_candidate)
cob_driver: cob_base_drive_chain | cob_bms_driver | cob_camera_sensors | cob_canopen_motor | cob_elmo_homing | cob_generic_can | cob_light | cob_mimic | cob_phidgets | cob_relayboard | cob_scan_unifier | cob_sick_lms1xx | cob_sick_s300 | cob_sound | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

  • Maintainer status: maintained
  • Maintainer: Matthias Gruhler <mig AT ipa.fhg DOT de>
  • Author: Christian Connette
  • License: Apache 2.0
  • Source: git https://github.com/ipa320/cob_driver.git (branch: indigo_release_candidate)
cob_driver: cob_base_drive_chain | cob_bms_driver | cob_canopen_motor | cob_elmo_homing | cob_generic_can | cob_light | cob_mimic | cob_phidgets | cob_relayboard | cob_scan_unifier | cob_sick_lms1xx | cob_sick_s300 | cob_sound | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

  • Maintainer status: developed
  • Maintainer: Matthias Gruhler <mig AT ipa.fhg DOT de>
  • Author: Christian Connette
  • License: Apache 2.0
  • Source: git https://github.com/ipa320/cob_driver.git (branch: kinetic_release_candidate)
cob_driver: cob_base_drive_chain | cob_bms_driver | cob_canopen_motor | cob_elmo_homing | cob_generic_can | cob_light | cob_mimic | cob_phidgets | cob_relayboard | cob_scan_unifier | cob_sick_lms1xx | cob_sick_s300 | cob_sound | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

  • Maintainer status: maintained
  • Maintainer: Matthias Gruhler <mig AT ipa.fhg DOT de>
  • Author: Christian Connette
  • License: Apache 2.0
  • Source: git https://github.com/ipa320/cob_driver.git (branch: kinetic_release_candidate)
cob_driver: cob_base_drive_chain | cob_bms_driver | cob_canopen_motor | cob_elmo_homing | cob_generic_can | cob_light | cob_mimic | cob_phidgets | cob_relayboard | cob_scan_unifier | cob_sick_lms1xx | cob_sick_s300 | cob_sound | cob_undercarriage_ctrl | cob_utilities | cob_voltage_control

Package Summary

The package cob_generic_can provides an interface for nodes on a can-bus and examplary wrappers for two PeakSys-can-libs. When a can-bus-device is generated (for an example see base_dirve_chain) you can use generic_can to create as many itfs as there will be components communicating via this can-bus. Assign type of the can communication device (e.g. usb-to-can or can-card of a specific vendor) and can-address of the target device. This package comes with wrappers for PeakSys and PeakSysUSB adapters.

Contents


2024-03-16 12:29