[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

rr_openrover_stack: rr_control_input_manager | rr_openrover_description | rr_openrover_driver | rr_openrover_driver_msgs | rr_openrover_simulation | rr_rover_zero_driver

Package Summary

The rr_openrover_driver_msgs package

Overview

This package contains the messages used to publish hardware data from the OpenRover.

RawRrOpenroverDriverFastRateData.msg

std_msgs/Header header
std_msgs/int32 left_motor
std_msgs/int32 right_motor
std_msgs/int32 flipper_motor

RawRrOpenroverDriverMedRateData.msg

std_msgs/Header header
std_msgs/int32 reg_pwr_total_current
std_msgs/int32 reg_motor_fb_rpm_left
std_msgs/int32 reg_motor_fb_rpm_right
std_msgs/int32 reg_flipper_fb_position_pot1
std_msgs/int32 reg_flipper_fb_position_pot2
std_msgs/int32 reg_motor_fb_current_left
std_msgs/int32 reg_motor_fb_current_right
std_msgs/int32 reg_motor_charger_state
std_msgs/int32 reg_power_a_current
std_msgs/int32 reg_power_b_current
std_msgs/int32 reg_motor_flipper_angle
std_msgs/int16 battery_current_a
std_msgs/int16 battery_current_b

RawRrOpenroverDriverMedRateData.msg

std_msgs/Header header
std_msgs/int32 reg_motor_fault_flag_left
std_msgs/int32 reg_motor_temp_left
std_msgs/int32 reg_motor_temp_right
std_msgs/int32 reg_power_bat_voltage_a
std_msgs/int32 reg_power_bat_voltage_b
std_msgs/int32 reg_robot_rel_soc_a
std_msgs/int32 reg_robot_rel_soc_b
std_msgs/uint16 battery_mode_a
std_msgs/uint16 battery_mode_b
std_msgs/uint16 battery_temp_a
std_msgs/uint16 battery_temp_b
std_msgs/uint16 battery_voltage_a
std_msgs/uint16 battery_voltage_b
std_msgs/int32 buildno

RawRrOpenroverDriverMedRateData.msg

std_msgs/Header header

std_msgs/bool over_charged_alarm
std_msgs/bool terminate_charge_alarm
std_msgs/bool over_temp_alarm
std_msgs/bool terminate_discharge_alarm
std_msgs/bool remaining_capacity_alarm
std_msgs/bool remaining_time_alarm

std_msgs/bool initialized
std_msgs/bool discharging
std_msgs/bool fully_charged
std_msgs/bool fully_discharged


2024-12-28 18:37